1.2 -1.4mm (3-3 1/2 oz.) Soft, Supple distressed Brown Naked Leather.
Two leather-lined front pockets (approx. 4.5" deep).
Double stitched lines throughout.
Double sided interfacing.
Two internal leather lined pistol pockets (approx. 9" deep) one zippered And the other snapped.
Genuine Bison Nickel front snaps.
Perma Core Thread by A&E for strong Stitching.
Poly Twill liner.
Adjustable Side Laces.
Made in USA.
Naked Leather, made from the finest raw material, are clean natural hides which have not been sanded to remove imperfections. Only the hair has been removed. The grain remains in its natural state which will allow the best fiber strength, resulting in greater durability. The natural grain also has natural breathability, resulting in greater comfort. The natural Naked Leather surface will wear better than other leather.
Thickness or Weight - Leather is usually measured in terms of ounces. One ounce equals 1/64th of an inch thickness. Thus, a weight of 7 to 8 oz. means the leather is 7/64th to 8/64th of an inch thickness. In an effort to make leather a uniform thickness, wet hides are run through a splitting machine. However, each animal is different and there is always a slight thickness variation throughout the hide. This is why leathers are usually shown with a range of thickness, such as, 4 to 5 oz., 6 to 7 oz., etc.
Leather Thickness Conversion Chart
1 1/2 oz.
2 1/2 oz.
3 1/2 oz.
3 3/4 oz.
4 1/2 oz.
Perma Core. A premium core spun sewing thread manufactured with continuous filament polyester core and polyester staple wrap for most sewing applications. The core spun construction delivers a thread with a higher strength and sewing performance over staple spun products, allowing for the use of smaller thread sizes. Perma Core maximizes seam quality while minimizing sewing problems. By American & Efird
Poly Twill Fabrics are often used for sturdy work clothing or durable upholstery because of its strength and durability. Twill also recover from wrinkles better than plain-weave fabrics do. When there are fewer interlacing, yarns can be packed closer together to produce high-count fabrics. In twill and higher counts, the fabric is more durable and air- and water-resistant.
The buffalo nickel (also known as the Indian head nickel) was produced from 1913 to 1938, inclusive. Mint marks for the coins are on the reverse, beneath the words "Five Cents" and above the rim. The Philadelphia, Denver, and San Francisco mints all participated in the mintage, though San Francisco generally had a much smaller annual production than either of the other two mints. The buffalo nickel, as designed by James Earle Fraser, featured a profile of a Native American on the obverse and an American Bison (buffalo) on the reverse.
Genuine Buffalo Nickel converted into snaps by Hillside USA.
The Mercury Silver Dime was first struck in 1916 and last struck in 1945. Each coin was struck in 900 Pure Silver. The coin was designed by famed sculptor Adolph A. Weinman, the winner of a national competition sponsored by the Treasury Department. Liberty is depicted wearing a winged cap to symbolize freedom of thought. However, the coin quickly became known as the "Mercury" Dime, because it was thought to portray Mercury, Roman messenger of the gods, who wore wings on his sandals.
Mercury Silver Dime converted into snaps by Hillside USA.
Hillside USA's products carry a LIFETIME GUARANTEE on the workmanship of every leather garment manufactured by Hillside USA. If a leather seam ever opens, a zipper breaks, a snap falls off or defective leather, we will repair or replace it for the life of the garment, under normal wear and use. Products that have become damaged due to pins, patches, misuse or neglect can be repaired but not replaced. Lining, Elastic and Velcro are guaranteed for three-years from the date of purchase. We will advise you of the cost of the repair or replacement and await your approval before proceeding. Hillside USA reserves the right to approve or deny a claim. Accessories section is not covered. Original invoice is needed in order to process your return. Damaged products should be returned directly to Hillside USA. You should send the product freight prepaid and insured, to the address below. Please include a note explaining the problem, along with $18.00 for return shipping and handling within the USA. International customers are responsible for the actual return shipping and insurance charges. Lifetime Guarantee is not transferable.